电池组平衡和功率估算

Battery Pack Balancing and Power Estimation

1116 次查看
科罗拉多大学系统
Coursera
  • 完成时间大约为 16 个小时
  • 普通(中级)
  • 英语
注:本课程由Coursera和Linkshare共同提供,因开课平台的各种因素变化,以上开课日期仅供参考

课程概况

In this course, you will learn how to design balancing systems and to compute remaining energy and available power for a battery pack. By the end of the course, you will be able to:

– Evaluate different design choices for cell balancing and articulate their relative merits
– Design component values for a simple passive balancing circuit
– Use provided Octave/MATLAB simulation tools to evaluate how quickly a battery pack must be balanced
– Compute remaining energy and available power using a simple cell model
– Use provided Octave/MATLAB script to compute available power using a comprehensive equivalent-circuit cell model

课程大纲

Passive balancing methods for battery packs

In previous courses, you learned how to write algorithms to satisfy the estimation requirements of a battery management system. Now, you will learn how to write algorithms for two primary control tasks: balancing and power-limits computations. This week, you will learn why battery packs naturally become unbalanced, some balancing strategies, and how passive circuits can be used to balance battery packs.

Active balancing methods for battery packs

Passive balancing can be effective, but wastes energy. Active balancing methods attempt to conserve energy and have other advantages as well. This week, you will learn about active-balancing circuitry and methods, and will learn how to write Octave code to determine how quickly a battery pack can become out of balance. This is useful for determining the dominant factors leading to imbalance, and for estimating how quickly the pack must be balanced to maintain it in proper operational condition.

How to find available battery power using a simplified cell model

This week, we begin by reviewing the HPPC power-limit method from course 1. Then, you will learn how to extend the method to satisfy limits on SOC, load power, and electronics current. You will learn how to implement the power-limits computation methods in Octave code, and will see results for a representative scenario.

How to find available battery power using a comprehensive cell model

The HPPC method, even as extended last week, makes some simplifying assumptions that are not met in practice. This week, we explore a more accurate method that uses full state information from an xKF as its input, along with a full ESC cell model to find power limits. You will learn how to implement this method in Octave code and will compare its computations to those from the HPPC method you learned about last week.

Future Battery-Management-System Algorithms

Present-day BMS algorithms primarily use equivalent-circuit models as a basis for estimating state-of-charge, state-of-health, power limits, and so forth. These models are not able to describe directly the physical processes internal to the cell. But, it is exactly these processes that are precursors to cell degradation and failure. This week quickly introduces some concepts that might motivate future BMS algorithms that use physics-based models instead.

Capstone project

This capstone project explores the design of resistor value for a switched-resistor passive balancing system as well as enhancing a power-limits method based on the HPPC approach.

千万首歌曲。全无广告干扰。
此外,您还能在所有设备上欣赏您的整个音乐资料库。免费畅听 3 个月,之后每月只需 ¥10.00。
Apple 广告
声明:MOOC中国十分重视知识产权问题,我们发布之课程均源自下列机构,版权均归其所有,本站仅作报道收录并尊重其著作权益。感谢他们对MOOC事业做出的贡献!
  • Coursera
  • edX
  • OpenLearning
  • FutureLearn
  • iversity
  • Udacity
  • NovoEd
  • Canvas
  • Open2Study
  • Google
  • ewant
  • FUN
  • IOC-Athlete-MOOC
  • World-Science-U
  • Codecademy
  • CourseSites
  • opencourseworld
  • ShareCourse
  • gacco
  • MiriadaX
  • JANUX
  • openhpi
  • Stanford-Open-Edx
  • 网易云课堂
  • 中国大学MOOC
  • 学堂在线
  • 顶你学堂
  • 华文慕课
  • 好大学在线CnMooc
  • (部分课程由Coursera、Udemy、Linkshare共同提供)

© 2008-2019 MOOC.CN 慕课改变你,你改变世界