嵌入式系统-塑造世界:多线程接口

Embedded Systems - Shape The World: Multi-Threaded Interfacing

Build real-world embedded solutions using a bottom-up approach from simple to complex in this hands-on, lab-based course.

330 次查看
德州大学奥斯汀分校
edX
  • 完成时间大约为 8
  • 中级
  • 英语
注:因开课平台的各种因素变化,以上开课日期仅供参考

你将学到什么

Understanding of embedded systems using modular design and abstraction

C programming: considering both function and style

Build and test circuits with switches, LEDs, resistors, potentiometers, and liquid crystal displays

Synchronizing hardware and software input/output with switches, lights, sound, sensors. motors, and liquid crystal displays

Implement an I/O driver and multi-threaded programming using interrupts

Debug using oscilloscopes, logic analyzers, and software instrumentation

Learn how to read a data sheet

Construct a smart object and create a system as part of the Internet of Things

课程概况

Learn how electronic gadgets are designed, developed, and built as embedded systems that shape the world.

This is part two of a two part sequence. In this class, we will use interrupts to design a range of real-time systems including an audio player, a data acquisition system, a control system, and an interactive game. This is a hands-on, learn-by-doing course that shows you how to build solutions to real-world problems using embedded systems. These courses use a bottom-up approach to problem solving, building gradually from simple interfacing of switches and LEDs to complex concepts like display drivers, digital to analog conversion, generation of sound, analog to digital conversion, motor control, graphics, interrupts, and communication. We will present both general principles and practical tips for building circuits and programming the microcontroller in the C programming language. You will develop debugging skills using oscilloscopes, logic analyzers, and software instrumentation. Laboratory assignments are first performed in simulation, and then you will build and debug your system on the real microcontroller. At the conclusion of this course you will possess the knowledge to build your own arcade-style game from the ground up.

This is the fourth time we have offered this course. Since the reviews have been overwhelmingly positive we do not plan major changes over the previous offerings of the course. We did however break the large class into two smaller classes. There are eight labs in part 1 and six labs in this class. Students can pick and choose a subset of labs to achieve certification. The three labs that students found most rewarding were the hand-held video game, generating sound using a digital to analog convertor, and creating a smart object using Wifi communication.

To complete this course, you will be required to purchase a Texas Instruments TM4C123 microcontroller kit and a few electronic components. This microcontroller has a state-of-the-art ARM Cortex-M4 processor.

We will provide instructions about purchasing the kit and installing required software at: http://edx-org-utaustinx.s3.amazonaws.com/UT601x/index.html.

课程大纲

The best way to understand what you will learn in this class is to list the labs you will complete and the example projects we will build. You will complete each lab first in simulation and then on the real board. For each module we will design a system and you will build and test a similar system.

Module 1: Welcome and introduction to course and staff

Module 11: UART - The Serial Interface, I/O Synchronization

Lab 11. Write C functions that output decimal and fixed-point numbers to serial port

Module 12: Interrupts

Lab 12. Design and test a guitar tuner, producing a 440 Hz tone

Module 13: DAC and Sound

Lab 13. Design and test a digital piano, with 4 inputs, digital to analog conversion, and sound

Module 14: ADC and Data Acquisition

Lab 14. Design and test a position measurement, with analog to digital conversion and calibrated output

Module 15: Systems Approach to Game Design

Lab 15. Design and test a hand-held video game, which integrates all components from previous labs. Lab 15 will be graded by having students watch videos of each other's’ games.

Module 16: Wireless Communication and the Internet of Things

Lab 16. Connect a CC3100 booster pack to the LaunchPad and communicate with an access point. Lab 16 will first fetch weather from the internet, and then you will send data to the class server.

预备知识

Computer programming course in any language with exposure to variables, arithmetic, logic, loops, and functions. High school physics course covering current, voltage, resistance, and power. We expect students to have knowledge obtained in part 1 of the course including LED/switch interfacing, I/O port programming, finite state machine, microcontroller debugging, and C programming.

千万首歌曲。全无广告干扰。
此外,您还能在所有设备上欣赏您的整个音乐资料库。免费畅听 3 个月,之后每月只需 ¥10.00。
Apple 广告
声明:MOOC中国十分重视知识产权问题,我们发布之课程均源自下列机构,版权均归其所有,本站仅作报道收录并尊重其著作权益。感谢他们对MOOC事业做出的贡献!
  • Coursera
  • edX
  • OpenLearning
  • FutureLearn
  • iversity
  • Udacity
  • NovoEd
  • Canvas
  • Open2Study
  • Google
  • ewant
  • FUN
  • IOC-Athlete-MOOC
  • World-Science-U
  • Codecademy
  • CourseSites
  • opencourseworld
  • ShareCourse
  • gacco
  • MiriadaX
  • JANUX
  • openhpi
  • Stanford-Open-Edx
  • 网易云课堂
  • 中国大学MOOC
  • 学堂在线
  • 顶你学堂
  • 华文慕课
  • 好大学在线CnMooc
  • (部分课程由Coursera、Udemy、Linkshare共同提供)

© 2008-2020 MOOC.CN 慕课改变你,你改变世界